95
Your original voices should naturally have original names. This function can be
used to assign a name of up to 8 characters to the current voice.
VOICE NAME
[VOICE] → [EDIT] → [MENU] → 8:Name → [ENTER/YES]
VOICE EDIT MODE / 8:Name
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Name
Range: See character list, below
Controls: [F1] … [F4], [F7], [F8], [CS1] … [CS8], [-1] [+1], Dial,
GROUP, PROGRAM
Assigns a name of up to 8 characters to the current voice.
Use the [F7] function key to move the character cursor to the left, and the
[F8] function key to move the cursor to the right. Use the GROUP and PRO-
GRAM keys to input a character at the cursor position. Each GROUP and
PROGRAM key selects the three characters printed above it in sequence. It is
also possible to use the [-1] and [+1] keys or dial to scroll through the avail-
able characters (see list below).
The sliders, [CS1] through [CS8], independently select characters for the
corresponding character position: [CS1] selects the first character, [CS2] selects
the second character, and so on.
The first four function keys also perform important functions: [F1] clears
the entire name, [F2] selects upper-case characters, [F3] selects lower-case
characters, and [F4] inserts a space at the cursor position.
[A]: A → B → C
[B]: D → E → F
[C]: G → H → I
[D]: J → K → L
[E]: M → N → O
[F]: P → Q → R
[G]: S → T → U
[H]: V → W → X
[1]: Y → Z → 0
[2]: 1 → 2 → 3
[3]: 4 → 5 → 6
[4]: 7 → 8 → 9
[5]: * → & → _
[6]: / → . → ,
[7]: ’ → ! → ?
[8]: # → : → ;
PROGRAM key
GROUP key
