Filter
Top Products
62 www.akg.com
The HUB 4000 is the intelligent hardware
interface between a WMS 4000 wireless
system and one (or several) PCs. No more
need for cumbersome cabling; the HUB 4000
concentrates the data flow of up to eight recei-
vers and connects easily to any PC with an
Ethernet interface.
Naturally, complex systems can also use sever-
al HUB 4000s – in fact, up to 16. With eight
receivers per hub, you can operate a maximum
of 128 receivers – from a single PC!
The HUB 4000 meets all standards and re-
quirements for smooth operation with PC com-
ponents. Connection to the PC or PC network
is via standard CAT-5 Ethernet cables with RJ-
45 connectors, while the data are transmitted
via IP protocol.
Working with WMS 4000 multichannel
systems, you can optimize operating conve-
nience and reliability by simply linking the
WMS 4000 PC network components with
standard PC accessories. This allows you to
send receiver data through the HUB to a wire-
less LAN, and receive them on a tablet PC. In
the REHEARSAL mode, you can take the PC
on the stage and monitor important data such
as RF levels on site. This makes it incredibly
easy to set up the most complex system and
ensures maximum operating reliability.
THE LINK BETWEEN THE WMS 4000 AND A PC NETWORK
AKG WMS 4000 NETWORK CONCENTRATOR
Example: WMS 4000/PC network
The example shown opposite demonstrates how state-
of-the-art PC and audio technologies can be linked to
ensure a level of convenience unknown to date.
You can service and operate the entire WMS 4000 system
from permanently installed computers or a laptop with a
wireless connection to the network. You can also access
the AKG homepage via internet at any time, e.g., for
downloading the frequency management program for
other WMS systems, updating firmware, setting up a
remote desktop, etc. Total networking for total control!
HUB 4000 Network concentrator
On/off switch
Data connection
For a reliable data transfer to the PC and addressing
the MCS 4000 “Mission Control Software”
.
Status LED
Display indicating the active channel
AKG WMS HUB 4000