Filter
Top Products
11
4.11 MASTER SECTION
14
- MAIN MIX LEVEL
This Control sets the amount of signal sent either to the Main Out socket or to the Tape Output.
15
- LED METER
This stereo 12 segments Led Meter will indicate the level of the overall output signal.
16
- 2 TRACK signal path
17
- AUX RETURN
16
18
17
15
14
AUX
RETURN
1
-+15
8
-+15
8
MAIN MIX
LEVEL
-4
-10
-30
-20
-7
0
-2
2
4
7
10
OUTPUT LEVELOUTPUT LEVEL
CLIP
PHANTOM
POWER
2TK TO
CONTROL ROOM
2TK TO
CONTROL ROOM
EFX TO AUX1
2TK TOMIX
2TK TOMIX
2
-+15
8
L R
-
8
MAX
PHONES /PHONES/
CONTROL
ROOM
CONTROL
ROOM
18
- PHONES/CONTROL ROOM
This Control sets the amount of signal sent to the Control Room and headphone.
19
- PHANTOM
This LED indicates when the Phantom Power is switched on.
20
- POWER
This LED indicates when the Power is on in your S-8.
20
19
If you push down the 2TK TO CONTROL ROOM
button, the 2 TRACK IN signal will be routed into
the Control Room output and the level will be ad-
justed in level by the Control Room knob.
If you push down the 2TR TO MIX button, the 2
TRACK IN signal will be routed into the MAIN
output and will be adjusted in level by the MAIN
MIX LEVEL knob.
The Auxiliary Return 1 and 2 are in fact two add-
itional stereo Line inputs.
AUX RETURN 1 is configured to be assigned
permanently to the Main Mix. (It operates in Mono
Mode if you connect only the left jack).
The EFX TO AUX1 button is used to swtich the
signal from AUX RETURN 2 between MAIN MIX
and AUX SEND 1.
If a signal is routed to AUX RETURN 1 and no
signal is connected to AUX RETURN 2, depressing
the EFX TO AUX 1 will route the signal to AUX
SEND 1, which level will be controlled by AUX
RETURN 2.
Without doubt, this feature will be very useful for
you.