Filter
Top Products
19
8. TECHNICAL SPECIFICATION
Mono input channels
Stereo input channels
Line input
Balanced
Frequency response
10Hz to 55kHz, 3dB
+
Distortion (THD & N)
0.005% at +4dBu, 1kHz
Impedances
Microphone input
1.4kOhm
Channel Insert return
2.5kOhm
All other inputs
10kOhm or greater
Tape out
1kOhm
All other output
120Ohm
Equalization
Hi shelving
+
15dB @12kHz
Mid bell
+
12dB @2.5kHz
Low shelving
+
15dB @80Hz
Low Cut filter
75Hz, 18dB/oct.
Main Mix Section
Noise (Bus noise) Fader 0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned
and set to UNITY gain: 90dBr (ref.:+4dBu)
Max output
+22dBu balanced XLR,
22dBu unbalanced, 1/4" jacks+
AUX Return gain range
- to +15dB
AUX Sends max out
+22dBu
Power supply
Main voltage
USA/Canada 100 120V~, 60Hz
Europe 210 240V~, 50Hz
U.K./Australia 240V~, 50Hz
Power Consumption
18W
Fuse
100 120V~ : T500mAL
210 240V~ : T250mAL
Main connection
Standard IEC receptacle
Physical
Net weight
2.4Kg (5.29lb)
Shipping weight 3.5Kg (7.72lb)
Dimension (W D H)
245mm 268mm 24/73mm (9.64" 10.54" 0.94"/2.87")
Microphone input
electronically balanced, discrete input configuration
Frequency response
10Hz to 55kHz, + 3dB
Distortion (THD & N)
0.005% at 4dBu, 1kHz+
Gain range 0dB to 60dB (MIC)
SNR (Signal to Noise Ratio)
115dB
Line input
electronically balanced
Frequency response
10Hz to 55kHz, 3dB
+
Distortion (THD & N)
0.005% at 4dBu, 1kHz+
Sensitivity range
+
15dBu to 45dBu