Nilfisk-ALTO S-8 Musical Instrument User Manual


 
13
4.12 REAR PANEL DESCRIPTION
4
Use only with a 250V fuse
POWER
ON
OFF
PHANTOM
RATED POWER CONSUMPTION: 18W
LEFT
RIGHTRIGHT
LEFT
MAIN MIX OUTPUT
(BAL/UNBAL)
CONTROL
ROOM OUTPUT
CAUTION:
REPLACE WITH THE SAME TYPE FUSE AND RATING
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD
AVIS: RISQUE DE CHOC ELECTRIQUE
- DO NOT OPEN
- NE PAS OUVRIR
RIGHT LEFT
Use only with a 250V fuse
Use only with a 250V fuse
12
3
12
3
AC INPUT
EUROPE
210-240V 50Hz
Fuse:T250mAL
USA / Canada
100-120V 60Hz
Fuse:T500mAL
UK / Aust
240V 50Hz
Fuse:T250mAL
25
- POWER
This switch is used to turn the Main Power ON and OFF.
4
- PHANTOM
This switch will apply +48 Volt Phantom Power only to the 5 XLR microphone inputs. Never connect microphones
when the Phantom Power is on already.
26
- AC INLET WITH FUSE HOLDER
Use it to connect your S-8 to the Main AC with the supplied AC cord. Please check the Voltage available in your
Country and make sure the voltage is identical to the values marking on the product. Replace the fuse with the
same type by the qualified personnel only
This stereo output is supplied both with XLR and 1/4" jack socket and it is controlled by the Main Mix Level on
the front panel. It will send the audio signal to an amplifier. The output level can be varied from - to +15dB.
- MAIN MIX OUTPUT
27
These 1/4" phone sockets will be used to send the signal to Studio Monitor speakers or to a second set of PA.
- CONTROL ROOM OUTPUT
28
25
26
27
28