Filter
Top Products
21
23
22
1
2
STEREO AUX RETURN AUX SEND
2-TRACK IN/OUT
TAPE IN TAPE OUT
LEFT
RIGHT
L
R
1
2
LEFT(MONO)
RIGHT
21
- 2-TRACK IN/OUT
Use the Tape input if you wish to listen to your Mix from a Taper Recorder or DAT, You can assign the signal coming
form the Taper Recorder either to a pair of studio monitor using the Control Room assignment on the front panel or
you can also send the signal directly to the Main Mix.
Input
Output
These 1/4" TRS sockets will route the main mix into a tape recorder.
12
This socket will send out the signal mix to a pair of headphones.
24
- PHONES
PHONES
24
Use these stereo 1/4" phone socket to return the sound of an effect unit or sound processor to the Main Mix.
Alternatively you can use them as an extra auxiliary input.
- STEREO AUX RETURN
22
- AUX SEND 1 and 2
23
These 1/4" phone sockets are used to send out the signal from the AUX Bus to external devices such as effects
and sound processors.