Filter
Top Products
1
2
3
AMC PDM1 (Phone-Doorbell-Mute Module)
Front Rear
7. Using the Link Jack to create Eight Zones
8. Mute Input and the AMC PDM1 (Phone-Doorbell-Mute Module)
(This is an optional feature)
(This is an optional feature)
Two XOi can be made to react as one using the back-panel 3.5mm connection
labeled "Link". This requires the use of "Y" cables to link the source inputs and IR
outputs. A single mono mini-patch cable is then plugged into the "Link" jack on both
XOi. This links the All Off command so when it is initiated at any of the zone
keypads, all eight zones will turn off.
The back panel of the XOi has a 3.5mm non-shorting stereo connector input labeled
"Mute". This is designed to be used with the AMC PDM1 Phone-Doorbell-Mute
module. When the PDM1 is connected, the system will temporarily mute when the
phone or doorbell rings.
1,2 Doorbell
3. RJ-11 Connection
(This is an optional feature)
The back of PDM1 will accept up to two AC or DC voltages from two different
doorbell chimes.
This connection is done with two conductor wire from the terminals on the doorbell
chime to the Doorbell A or Doorbell B inputs on the back of the PDM1, Polarity is
not important for this connection.
Up to two phone lines can be brought into the RJ-11 connection on the back.
The voltage from the phone ringer will trigger the XOi System to mute.
12