Filter
Top Products
REAR PANEL CONNECTIONS
4
1. Local Source Inputs 1~4
2. IR Out - 38KHz
3. IR Out - 56KHz
4. Mute
5. Link
6. Status
7. 12VDC
8. Keypads & Remote Sources
9. Speaker Terminals
10. RS232
11. AC input receptacle with Fuse
Each of these stereo RCA inputs
receives an audio signal from up to
four independent audio sources.
Remarks: There are other 4 Remote
sources from Zone 1~4 as Remote
Source Inputs R5 to R8 can be
selected by all zones.
Remote Source R5 is located at
XS1 of Zone 1, Remote Source R6
is located at XS1 of Zone 2, Remote
Source R7 is located at XS1 of Zone
3 and Remote Source R8 is located
at XS1 of Zone 4. Signals of R5 are
mixed with signals of Local Source 1,
Signals of R6 are mixed with signals
of Local Source 2, Signals of R7 are
mixed with signals of Local Source 3
and Signals of R8 are mixed with
signals of Local Source 4. Users can
connect Source unit to one of the
two mixed source inputs or connect
two Source units to both Local and
Remote Source Inputs. When users
connect two Source units to both
Local and Remote Source Inputs,
users can play each source
separately or play both sources at
the same time with signals of the two
sources mixed together.
For most Audio Sources
For cable and satellite boxes
This 3.5mm non-shorting Stereo
connector (Power, Mute, Gnd) is
designed to be used in conjunction
with the AMC PDM1 (Phone-Doorbell-
Mute Module) - This is an option
feature.
This 3.5mm mono connection is used
to expand the AMC XOi from four to
eight zones. - This is an option feature.
This 3.5mm mono connection provides
a +12VDC output when a zone is
turned on. This can be used to trigger
external equipments.
For supplying 12VDC to external
modules. (total 1A max)
This is used for making interface with
other system and for factory purposes.
- This is an option feature.
FRONT PANEL CONTROLS
1. Power Switch (Standby / Off) & Blue LED
2.ZoneLED&4squareRecesses
The Power Switch turns AMC XOi "Standby" or "Off"
The Blue LED will be lit up during "Standby", will be turned off during "Off"
Each of these LEDs indicates, when lit, that its zone keypads are turned on.
The 4 square recesses are for putting labels of names of all zones