Filter
Top Products
ZONE 1 MIDRANGE CONTROL - This knob is used to adjust the midrange
levels of ZONE 1 allowing for a maximum midrange gain of 15dB or maximum
decrease of -30dB. Turning the knob in a counter-clockwise direction will decrease
the amount of midrange applied to the ZONE 1 signal, turning the knob in a clockwise
direction will increase the amount of midrange applied to the ZONE 1 signal.
ZONE 1 BASS CONTROL - This knob is used to adjust the low frequency levels of ZONE 1
allowing for a maximum bass gain of 15dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the ZONE 1
signal, turning the knob in a clockwise direction will increase the amount of bass applied to
the ZONE 1 signal.
18. ZONE 2 EQ CONTROLS -
ZONE 1 TREBLE CONTROL - This knob is used to adjust the treble levels of ZONE 1 allowing
for a maximum treble gain of 15dB or maximum decrease of -30dB. Turning the knob in a
counter-clockwise direction will decrease the amount of treble applied to the ZONE 1 signal,
turning the knob in a clockwise direction will increase the amount of treble applied to
the ZONE 1 signal.
ZONE 1 MIDRANGE CONTROL - This knob is used to adjust the midrange levels of ZONE 1
allowing for a maximum midrange gain of 15dB or maximum decrease of -30dB. Turning
the knob in a counter-clockwise direction will decrease the amount of midrange applied
to the ZONE 1 signal, turning the knob in a clockwise direction will increase the amount
of midrange applied to the ZONE 1 signal.
ZONE 1 BASS CONTROL - This knob is used to adjust the low frequency levels of ZONE 1
allowing for a maximum bass gain of 15dB or maximum signal decrease of -30dB. Turning
the knob in a counter-clockwise direction will decrease the amount of bass applied to the
ZONE 1 signal, turning the knob in a clockwise direction will increase the amount of bass
applied to the ZONE 1 signal.
19. ZONE 1 MONO/STEREO SWITCH - This switches the ZONE 1 output between stereo and
mono.
20. ZONE 2 MONO/STEREO SWITCH - This switches the ZONE 2 output between stereo and
mono.
21. SEND CONTROL - This knob controls the output signal to an external effects device such as a
echo box, phaser, or reverb.
22. SEND/RECEIVE ON/OFF SWITCH - This button turn the effect function on and off. When the
effect function is active a red LED will glow next to the power switch. When this function is not active
the SEND (21) and RECEIVE (25) controls will not function.
23. MAIN POWER SWITCH - This is the main power ON/OFF button. A LED beside the power switch
will glow indicating power is ON. Before main power is applied, be sure you have made all connections
to the mixer. Also be sure your amplifier(s) is(are) tuned off. Remember to avoid damaging pops to the
speakers, the mixer is turned on first and turned off last.
24. BNC JACK FOR GOOSENECK LAMP - This jack is used to connect an American Audio® 12V
DC gooseneck lamp. To avoid damage to the mixer do not attempt to connect anything other than and
American Audio® gooseneck lamp to this connection.
25. RECEIVE CONTROL - This knob controls the signal input from an external effects device such as
COMMANDER PLUS™ CONTROLS AND FUNCTIONS
©American Audio® - www.americandj.com - Commander Plus™ Instruction Manual Page 12