Filter
Top Products
Technical Speci cations -
Model:
DX4, 4 Channel Audio Mixer.
POWER SUPPLY:
AC 115/230V, 50/60Hz (External 18V~500mA
Power Supply)
DIMENSIONS:
254 (W) x 308 (D) x 102.5 (H) mm
WEIGHT:
5.5 Lbs./2.8Kgs
CROSSFADER:
Optical detecting fader start control -
Low Residue Resistance Crossfader.
POWER CONSUMPTION:
12 Watts Typical /
16 Watt with full headphone output
HEADPHONE IMPEDANCE:
16 Ohms
ENVIRONMENTAL CONDITION:
Operating Temperature 5 to 35 deg. C
Humidity 25 to 85% RH (non-condensing)
Storage Temperature -20 to 60 deg. C
INPUT SENSITIVITY:
LINE:
10K ohm input impedance
70mV rms sensitivity for 0dBm output
PHONO:
47Kohm input impedance
1.1mV rms sensitivity @ 1KHz for 0dBm output
MICROPHONE:
10Kohm input impedance unbalanced
1.0mV rms sensitivity for 0dBm output
500mV rms max input
Output Sensitivity (Level/
Impedance): Note: 0dBV=1Vrms
OUTPUT SENSITIVITY:
MASTER OUT:
9V rms max
Head
PHONES:
0.5W into 47ohm
FREQUENCY RESPONSE:
LINE:
20Hz-22KHz +/-0.5dB
PHONO:
+/-1dB except for controlled attenuation of -3dB
@ 20Hz to reduce rumble and feedback
MICROPHONE:
20Hz-15KHz +/-0.5dB
SIGNAL TO NOISE RATIO: (MAXIMUM OUTPUT)
:
LINE:
Better than 94dB
PHONO:
Better than 85dB
MIC:
Better than 76dB
THD - Total Harmonic Distortion:
MASTER OUTPUT:
L
ess Than 0.1%
CHANNEL EQUALIZER:
BASS:
+12/-12dB @100Hz
LOW MIDDLE:
+12/-12dB @1KHz
HIGH MIDDLE:
+12/-12dB @4KHz
TREBLE:
+12/-12dB @12KHz
Components and parts are subject to change for improvements within the range of the speci cations.
DX4™ Specifications
©
American Audio
®
- www.americandj.com - DX4™ Instruction Manual Page 13