Filter
Top Products
24
MX370101A HSDPA IQproducer
Optional
■ HSDPA IQproducer:
The MX370101A HSDPA IQproducer is GUI-driven PC applica-
tion software used to set up the parameters and generate
waveform patterns according to the 3GPP HSDPA
(Uplink/Downlink) system. The generated waveform patterns
are downloaded to the MG3700A, and used to output HSDPA
Modulation baseband signals and RF signals with the ARB
generation function of the MG3700A.
In addition, it is possible to set the parameters specified in
TS25.212 with respect to HS-PDSCH and HS-DPCCH. The
signals in various states can be generated by changing the
transmitting process freely.
In addition, the Downlink Easy Setup function provides typical
items and parameters so that the settings can be executed
simply by selecting items/parameters.
CPU Pentium III 1 GHz or faster
Memory size ≥512 Mbytes
HDD ≥5 Gbytes
Display 1024 × 768 pixels or more
OS Windows
®
2000 Professional, Windows
®
XP
•
IQproducer™ operating environment
•
Downlink Settings:
Various parameters conforming to standards can be set for
downlink (for details, refer to the “Downlink parameter setting
range” table shown later).
The Downlink Easy Setup function provides the items for the
HSDPA Fixed Reference Channel (FRC) specified in 3GPP
TS25.101 and the Reference Measurement Channel (RMC)
specified in 3GPP TS25.101, TS25.104. Parameter setting and
waveform pattern generation can be performed simply by
selecting items.
[Easy Setup items]
FRC: H-Set1 (QPSK), H-Set1 (16QAM), H-Set2 (QPSK),
H-Set2 (16QAM), H-Set3 (QPSK), H-Set3 (16QAM),
H-Set4, H-Set5
RMC: RMC12.2 kbps (for RX test),
RMC12.2 kbps (for Performance test),
RMC64 kbps (for Performance test),
RMC144 kbps (for Performance test),
RMC384kbps (for Performance test)
•
Uplink Settings:
For Uplink, parameter setting for the UL-DPCCH/UL-DPDCH
and HS-DPCCH channels and waveform pattern generation
can be performed (for details, refer to the “Uplink parameter
setting range” table shown later).
HS-DPCCH (ACK, NACK, CQI)
UL-DPCCH
UL-DPDCH
LAN or Compact Flash
PC
MX370101A
(1) IQproducer is
installed in PC.
(2) Waveform data is
generated using
IQproducer.
(3) Waveform data is
transmitted to
MG3700A.
(4) The waveform
data of an output
signal is chosen.
MG3700A Vector Signal Generator
Windows/Windows2000/WindowsXP is a registered trademark of
Microsoft Corporation.
*MX370X_E_050127 1/28/05 8:52 AM Page 24