Axiom Audio Electronic Keyboard Electronic Keyboard User Manual


 
Axiom Line User Guide
13
English
25-note version:
< Select the physical controller for programming using method 1 or 2 above.
< Press the Advanced button.
< Press the Ctrl Assign key on the keyboard.
< The LCD display will show the currently assigned MIDI controller number The physical controller you are
programming is displayed in the bottom left hand corner of the LCD display for clarity.
< Use the numeric data entry keys or the -/+ buttons to enter the MIDI controller 0-131 as defined in Appendix C.
< Press the Enter key to confirm and return to performance mode.
The settings for your controllers can be saved to any of the 20 memory locations on your Axiom. This process is
explained in detail in section 3.2.
Note: By default, the LCD display shows transmitted real time controller values between 0 and 127 as a physical control
like an encoder or fader is being moved. Alternatively, the LCD can be configured to only show the assigned controller
number of the currently used physical controller (e.g. controller number 7 for Volume). The LCD display mode can be
changed as follows:
< Press the Zone Range and Zone/Group buttons together.
< The LCD will display OFF.
< Simultaneously press the Zone Range and Zone/Group buttons again to change the LCD back to its default mode.
The LCD will display ON.
2.4.3 Panic
At times you may find that the sound on your sound module or virtual instrument does not seem correct, or that notes get “stuck”
and sound continuously. When this happens, press the button combination for Panic which will send ‘reset all controllers’ and ‘all
notes off’ commands. This will release stuck notes and reset controller values back to normal. The messages are sent on all 16
MIDI channels. The LCD will show “Panic” while these messages are transmitted.
49- and 61-note versions:
< Press Data 1 and Data 2 together.
25-note version:
< Press Mute and Null together.
2.4.4 Reset
It is possible to completely reset your keyboard at any time. To do this, turn the Axiom off and then press and hold down both of
the -/+ buttons as you power up the keyboard.
Important Note: When you perform this reset, all of the factory presets are lost. To restore the factory presets, please use the
Enigma software, available as a free download at www.m-audio.com.