Axiom Audio Electronic Keyboard Electronic Keyboard User Manual


 
Axiom Line User Guide
43
English
Appendix E – Assignable Controller Numbers to Non-Linear Controllers
This table applies to the following controls on your Axiom:
< Assignable buttons (Axiom 49/61 only)
< Transport controls
< Sustain pedal
MIDI CC Description Data 1 Data 2 Data 3
0-119 Standard MIDI CC's - Toggle Value 2 Toggle Value 1
120-127 Channel Mode Messages - Toggle Value 2 Toggle Value 1
128 Pitch Bend Range - Sensitivity Value -
129 Channel Fine Tune - Tuning Amount -
130 Channel Coarse Tune - Tuning Amount -
131 Channel Pressure - Pressure Amount -
132 RPN Coarse Value RPN LSB RPN MSB
133 RPN Fine Value RPN LSB RPN MSB
134 NRPN Coarse Value NRPN LSB NRPN MSB
135 NRPN Fine Value NRPN LSB NRPN MSB
136 Master Volume GM* - Volume LSB Volume MSB
137 Master Pan GM* - Pan LSB Pan MSB
138 Master Coarse Tune GM* - Tuning LSB Tuning MSB
139 Master Fine Tune GM* - Tuning LSB Tuning MSB
140 Chorus Mod rate GM2* - Mod Rate -
141 Chorus Mod Depth GM2* - Mod Depth -
142 Feedback GM2* - Feedback Level -
143 Send to Reverb GM2* - Reverb Send Level -
144 Pitch Bend - Pitch Shift LSB Pitch Shift MSB
145 Program/Bank Preset Program Bank LSB Bank MSB
146 MIDI CC (on/off) MIDI CC Button Press Value Button Release Value
147 Note (on/off) Note Velocity Off Velocity On
148 Note (on/off toggle) Note Velocity Off Velocity On
149 MMC Command** - Command Select -
150 Reverb type GM2 * - Type -
151 Reverb time GM2 * - Time -
152 Chorus type GM2* - Type -
153 MIDI CC Decrement MIDI CC Start Value End Value
154 MIDI CC Increment MIDI CC Start Value End Value
155 Program decrement - Start Value End Value
156 Program increment - Start Value End Value
*** Controller Off*** - - -
* SysEx messages - for details please see section 3.6.7.2.
** MMC SysEx messages, for details please see section 3.8.2.
*** This value cannot be typed in using the numeric keypad. Type in 0 and then press the ‘-‘ button to set this value.