Filter
Top Products
14
MINICOM COM800
5. INSTALLATION
5.1 Connection options and audio connections
There are various ways to integrate the COM800 into your set-up. Depending on the application in
question, you will need different sets of connecting cables.
5.1.1 The MINICOM in the insert path
Connect the MINICOM via the insert paths of a mixing console if you want to compress individual
signals or sub-groups comprising several instruments. Use standard insert cables. These Y cables
have two 1/4" TS connectors at one end, and one 1/4 TRS connector at the other. Connect the plug
marked Send to the INPUT L jack of the COM800. Connect the Return plug to the corresponding
OUTPUT L jack of the device. Connect the TRS connector to the insert jack of the channel strip on
the mixing console.
For sub-group stereo compression use two insert cables and select a suitable preset. The second
cable must be connected to the INPUT/OUTPUT R jacks of the COM800.
Fig. 5.1: Connecting the MINICOM to the insert paths
Fig. 5.2: Insert cable with one 1/4" TRS and two 1/4" TS connectors
5. INSTALLATION