Filter
Top Products
28
EURODESK MX3282A
Channel Input Source Subgroup/Track Mic/Line mono/stere
o
1 (Kick Dr.) Tape 1 mix* L m
2 (Snare Dr.) Tape 2 mix* L m
3 (Hi-Hat) Tape 3 mix* L m
4 (Tom 1) Tape 4 mix* L m
5 (etc.) Tape 5 mix* L m
6 Tape 6 mix* L m
7 Tape 7 mix* L m
8 Tape 8 mix* L m
9 Tape 9 mix* L m
10 Tape 10 mix* L m
11 Tape 11 mix* L m
12 Lead Vocals Guide mix* M m
13 Back Vocals Guide 1 mix* M m
14 Back Vocals Guide 2 mix* M m
15 Back Vocals Guide 3 mix* M m
16 Guitar Guide 1 (Track 9) M m
17 Brass Guide 1 2&3 (Tracks 10&11) M m
18 Brass Guide 2 2&3 (Tracks 10&11) M m
19 Brass Guide 3 2&3 (Tracks 10&11) M m
20 Brass Guide 4 2&3 (Tracks 10&11) M m
21 Sequence Guide 1 mix L m
22 Sequence Guide 2 mix L m
23 Effects 1 mix L m
24 Effects 2 mix L m
25/26 Tape Mon 1/2 mix L s
27/28 Tape Mon 3/4 mix L s
29/30 Tape Mon 5/6 mix L s
31/32 Tape Mon 7/8 mix L s
AuxRtn1 Tape Monitor 9/10 mix L s
AuxRtn2 Tape Monitor 11/12 mix L s
AuxRtn3 Tape Monitor 13/14 mix L s
AuxRtn4 Tape Monitor 15/16 mix L s
Outputs remain unchanged (temporary)
Tab. 10.4: MX3282A example: 16-track studio recording overdubs
The layout shown in fig. 10.4 corresponds to the music overdub situation once all bass & drum takes have been
completed. We have re-patched tape tracks onto main channels.
Remember to disconnect (from the wall boxes or desk XLR inputs) any microphones not in use. Otherwise the
line inputs of channels 1-24 wont work properly (live mics picking up extraneous noise etc.).
*: The temporary tape monitor returns become redundant as and when tape tracks are able to be patched into
main channels. You could begin to spread your FX and sequenced music returns over these stereo channels
as they become available.
At last it is time for vocal overdubs and touch-ups like percussion parts.
(Fig. 10.4): Once overdubbing is complete the subgroups may be used in mono (or stereo pairs) as an aid to
mixdown, e.g. to control multiple backing vocals, or drum kit tracks such as tom-toms and overhead mics.
10.5 Multitrack Initialization
Set up the multitrack so that any track in record ready condition has its input monitored when the tape is
stationary. Place all tracks to be recorded into record ready status (once a recording has been made, these
tracks should automatically switch to tape playback).
10. APPLICATIONS