Filter
Top Products
32
EURODESK MX3282A
14. SPECIFICATIONS
Input channels
Mic input Electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz - 22 kHz) 129.0 dBu, 150 Ohm source
117.3 dBqp, 150 Ohm source
132.0 dBu, input shorted
122.0 dBqp, input shorted
Distortion (THD&N) 0,007% @ +4 dBu, 1 kHz, bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max input (Mic) +12 dBu
Line input Electronically balanced
gain range Unity to +40 dB
Max input (line) +22 dBu
Channel fader range +10 dB to -85 dB
Aux send gain range off to Unity to +15 dB
Equalization
Hi shelving 12 kHz +/-15 dB, Q fixed at 2 oct.
Hi mid bell (Ch 25-32) 3 kHz +/-15 dB, Q fixed at 2 oct.
Mid sweep (Ch 1-24) 100 Hz - 8 kHz +/-15 dB, Q fixed at 1 oct.
Lo mid bell (Ch 25-32) 500 Hz +/-15 dB, Q fixed at 2 oct.
Lo shelving 80 Hz +/-15 dB, Q fixed at 2 oct.
Low-cut (high pass) filter 75 Hz, 18 dB/oct.
Channel insert
Max in / out +22 dBu
Channel to channel crosstalk -95 dB @ 1 kHz
Subgroup section
Noise Bus noise @ fader 0 dB: -105.0 dBr (ref.: +4 dBu);
-92.0 dBr (ref.: +4 dBu, all input channels assigned,
Unity gain, channels muted);
-87.0 dBr (ref.: +4 dBu, all input channels assigned, Unity gain)
Submaster output
Max. output +22 dBu balanced/unbalanced
Fader range +10 dB to -85 dB/off
Main mix section
Noise Bus noise @ fader 0 dB: -102.0 dBr (ref.: +4 dBu);
-92.0 dBr (ref.: +4 dBu. all input channels assigned, Unity gain,
channels muted);
-87.0 dBr (ref. +4 dBu, all input channels assigned, Unity gain)
Max output +28 dBu balanced, +22 dBu unbalanced
Aux returns
Gain range off to Unity to +20 dB
Aux sends
Max. output +22 dBu
General
Distortion (THD & N) 0.007 %, @ +4 dBu, 1 kHz, bandwidth 80 kHz
Frequency response 20 Hz - 40 kHz +/-1 dB any input to any output; 10 Hz -120 kHz +/-3 dB
Physical dimensions
(H * W * D) Mixer approx. 3 3/4" (90 mm) * 40" (1015 mm) * 20 3/4" (527 mm)
Weight approx. 17,7 kg
(H * W * D) Power Supply Unit approx. 3 1/2" (86 mm) * 17 1/8" (435 mm) * 9 3/4" (246 mm)
Weight 6,2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
14. TECHNICAL DATA