Behringer PPA2000BT/PPA500BT DJ Equipment User Manual


 
20 21EUROPORT PPA2000BT/PPA500BT Quick Start Guide
EUROPORT PPA2000BT/PPA500BT Adding E ects
(EN) Step 5: Adding
E ects
(ES) Paso 5: Adición de
efectos
(FR) Etape 5 : Ajout des
e ets
(DE) Schritt 5:
Hinzufügen von
E ekten
(PT) Passo 5: Adicionado
Efeitos
(EN) Set the FX [LEVEL] knob on the
MULTI-FX PROCESSOR to approximately a
75%setting.
(ES) Coloque el mando FX [LEVEL] del MULTI-FX
PROCESSOR a aproximadamente el 75%.
(FR) Réglez le bouton FX [LEVEL] de la section
MULTI-FX PROCESSOR à environ 75% dumaximum.
(DE) Stellen Sie den FX [LEVEL]-Drehknopf am
MULTI-FX PROCESSOR auf etwa 75 % ein.
(PT) Arranje o botão FX [LEVEL] no MULTI-FX
PROCESSOR em aproximadamente75%.
(EN) Scroll through the available e ects
by turning the PROGRAM [PUSH] knob.
Thenumber in the display will  ash.
(ES) Desplácese por los distintos efectos disponibles
girando el mando PROGRAM [PUSH]. El número que
aparece en la pantalla parpadeará.
(FR) Faites dé ler les e ets avec le bouton PROGRAM
[PUSH]. Le numéro clignote.
(DE) Scrollen Sie durch die verfügbaren E ekte
durch Drehen des PROGRAM [PUSH]-Drehknopfs.
DieNummer auf der Anzeige wird blinken.
(PT) Gire através dos efeitos disponíveis, virando o
botão PROGRAM [PUSH]. Onúmero irá piscar
novisor.
(EN) Press the PROGRAM [PUSH] knob to
select the e ect. The number will
stop ashing
(ES) Pulse el mando PROGRAM [PUSH] para activar
el efecto elegido. El número dejará de parpadear
enpantalla.
(FR) Appuyez sur le bouton PROGRAM [PUSH] pour
sélectionner l'e et. Le numéro cesse de clignoter.
(DE) Drücken Sie den PROGRAM [PUSH]-Drehknopf,
umden E ekt zu wählen. Die Nummer hört auf,
zublinken.
(PT) Pressione o PROGRAM [PUSH] paraselecionar o
efeito. O número irá parar depiscar.
(EN) While speaking, singing, or playing,
turnthe channel FX knob clockwise/to
the right to the desired level on each
channel to which you wish to add e ects.
(ES) Mientras habla, canta o toca su instrumento,
gire el mando FX de canal hacia la derecha hasta
conseguir el nivel de efectos que quiera añadir a
cada canal.
(FR) Tout en parlant, en chantant ou en jouant
d'un instrument, tournez le potentiomètre FX de la
voie vers la droite jusqu'à obtenir le niveau désiré
pour chaque voie à laquelle vous souhaitez ajouter
des e ets.
(DE) Um die gewünschte E ektstärke eines jeden
Kanal einzustellen, drehen Sie dessen FX-Regler nach
rechts, während Sie ins Mikrofon sprechen/singen
oder ein Instrument spielen.
(PT) Enquanto fala, canta ou toca, gire o botão FX de
canal na direção horária/para a direita até o nível
desejado em cada canal ao qual desejar
adicionar efeitos.
(EN) Adjust the FX [LEVEL] knob on the
MULTI-FX PROCESSOR left or right from
the initial 75% setting to achieve your
desired overall e ects level in the mainmix.
(ES) Ajuste el mando FX [LEVEL] del MULTI-FX
PROCESSOR hacia la izquierda o la derecha con
respecto al ajuste inicial de 75% para conseguir
el nivel de efectos global que quiera para la
mezcla principal.
(FR) Tournez le potentiomètre FX [LEVEL] du
MULTI-FX PROCESSOR vers la gauche ou la droite
à partir du réglage initial de 75% jusqu'à obtenir
le niveau global d'e et vous convenant dans le
mix principal.
(DE) Drehen Sie den FX [LEVEL]–Regler der
MULTI-FX PROCESSOR–Sektion aus der anfänglichen
75% Position nach links oder rechts, um den
gewünschten Gesamtpegel der E ekte in der
Hauptmischung zu bestimmen.
(PT) Ajuste o botão FX [LEVEL] no MULTI-FX
PROCESSOR esquerdo ou direito a partir do ajuste
inicial de 75% para atingir o nível de efeitos geral
desejado no mix principal.