Filter
Top Products
TUBE CONDENSER MICROPHONE T‑1
Safety precautions
2
At a glance1.
1. Mount
the microphone
2. Connect
the microphone
to the PSU-T
3. Connect the PSU-T
to the mixer
4. Connect the
mains cable
5. Switch on
the PSU-T
6. Allow the tube
to warm up
7. And you’re
good to go!
Safety precautions2.
Please read all safety precautions and operating instructions before at-
tempting to operate the unit. Keep all safety precautions and operating
instructions for future reference.
Mechanical interferences:
Always keep in mind that the contained tube is a highly sensitive component.
Avoid impact and other mechanical interferences. BEHRINGER assumes
no liability for any damage caused by the user. If possible, keep a spare
tube of the same type (12AX7) at hand.
Water and moisture:
The T-1 is extremely sensitive to moisture. Both the microphone and the
PSU-T power supply should not be used near water (for example, near