Filter
Top Products
TUBE CONDENSER MICROPHONE T‑1
Control elements and connections
3
a bathtub, washing machine, swimming pool,etc.). When doing voice
recordings, always use the enclosed windscreen to protect the capsule
from moisture.
PSU-T power supply:
To reduce the risk of electric shock, do not remove the top cover (or the
rear section). No user serviceable parts inside.
Do not defeat the safety purpose of the polarized or grounding-type plug.
You should only connect the T-1 to the provided power supply.
Service and care:
After each use, wipe the microphone down with a soft cloth and place it
back into its protective casing (included with the microphone).
Control elements and connections3.
Microphone3.1
You can tell that the T-1 is switched on when the small window glows red.
It is also possible to activate an attenuation of −20 dB on the side of the
T-1, for example, when signal sources are very loud.
There is an XLR connector on the bottom end of the microphone. Connect
it to the power supply (PSU-T).
Power supply3.2
The included BEHRINGER PSU-T not only provides the supply volt-
age for the tube preamplier but also employs a circuit that reduces the
low frequency response. This is activated on the front panel with the
LOW CUT switch.