Filter
Top Products
English
Recording Your Keyboard Play
E-37
You can use the procedures below to delete an entire
recorder song or to delete a specific track of a recorder
song.
Deleting a Recorder Song
1.
Use the
(RECORDER) button to cycle
through the recorder modes until the
RECORDER lamp is lit (playback mode).
2.
While holding down the
(FUNCTION)
button, press the
(RECORDER) button.
This displays the recorder song selection screen.
3.
Use the
(w, q) buttons to select the
recorder song you want to delete.
4.
Hold down the
(RECORDER) button until
the message “Sure?” appears on the display.
5.
Press the
(YES) button to delete the
recorder song.
• To cancel the delete operation, press the
(NO)
button.
Deleting a Recorder Song Track
1.
Perform steps 1 through 3 of the procedure
under “Deleting a Recorder Song” to select
the recorder song that contains the track you
want to delete.
2.
Press the
(i) button.
This displays the track selection screen.
3.
Use the
(w, q) buttons to select the
track you want to delete.
4.
Hold down the
(RECORDER) button until
the message “Sure?” appears on the display.
5.
Press the
(YES) button to delete the track.
• To cancel the delete operation, press the
(NO)
button.
You can use punch-in recording to re-record a specific
part of recorder song that you want to improve or
correct.
1.
Turn on the recorder, enter the record mode,
and select the track that contains the section
you want to re-record.
• See step 3 under “Recording to a Specific Track
(Part)” (page E-35).
2.
Hold down the
(RECORDER) button until
the punch-in recording screen appears on the
display.
Deleting Recorder Data
Lit: Playback mode
Re-recording Part of a
Recorder Song
(Punch-in Recording)
Mistake
Playback
Use punch-in
recording to re-record
only this part.