Filter
Top Products
— 3 —
OPERATION
SETTING UP THE KEYBOARD
The initial settings
Tone: 000 (Piano) Channel 1 - 9 & 11 - 16
dr0 (Drum set 0) Channel 10
Modulation: 0 (Off)
MIDI control change
Volume: 100
Pan: 64 (Center)
Expression: 127 (Maximum)
Effect depth: 127 (Maximum)
Pitch bend sense: 2
Coarse tune: 0 (Center)
Fine tuning: 0 (Center)
Digital effect: E-0 (Digital effect 0)
MIDI channel: 01
Channel On/Off: On
Octave shift: 0
Modulation depth: 064
Touch response: r-0 (Touch curve 0)
Velocity at touch
response OFF: 100
Assignable jack: SUS (Sustain pedal)
Local control On/Off: On
Notes: 1* See the initial settings list as shown below.
2* See the initial settings in The General MIDI system on next page.
3* The exclusive message of "GM system on" will be tramsmitted when completing the operation.
System exclusive: GM system on [F0][7E][7F][09][01][F7]
Item Settin
g
Settin
g
o
p
eration
System Reset 1* 1. Press the control button and repeat it until the display
shows "Srt".
"SUr" and "Srt" will appear alternately on the display.
2. Press the + key.
Assignable Jack Sustain pedal 1. Press the control button and repeat it until the display
shows "JAC".
2. Using the +/- key, select "SUS" on the dispaly.
Sostenuto pedal 1. Press the control button and repeat it until the display
shows "JAC".
2. Using the +/- key, select "SoS" on the dispaly.
Soft pedal 1. Press the control button and repeat it until the display
shows "JAC".
2. Using the +/- key, select "SFt" on the dispaly.
GM Reset 3* 2* 1. Press the MIDI button and repeat it until the display shows
"Grt".
"SUr" and "Grt" will appear alternately on the display.
2. Press the + key.
3. Press the + key again.