Filter
Top Products
Recording Your Keyboard Play
E-46
1.
Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
“Recording and Playing Back Keyboard Play” (page
E-44).
2.
Press
5
.
This will enter record standby.
3.
Press a button from
ck
to
co
to select the track
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
• If you want to use a different tone than the one you
used in Track 1, press
bp
and then use
bs
(10-key) to
input the tone number.
4.
Press
bm
.
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
5.
To stop recording, press
bm
.
• To play back what you have recorded, press
bm
again.
Each press of
bm
starts and stops playback.
6.
Repeat steps 2 through 5 to record the other
tracks.
7.
After you finish recording all of the tracks,
press
bm
.
• This will start playback of the recorded tracks. Press
bm
to stop or restart playback.
• At this time you can turn off playback of specific tracks
using buttons
bt
to
co
. Pressing a key toggles playback
of each track on (track number displayed) or off (track
number not displayed).
• If you want to re-record a track, press
5
. This will
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
8.
Press
5
twice to exit the recorder mode.
■To delete a recorded track
After step 3 of the above procedure, do hold down
5
(without
pressing any keyboard key) until the message “Tr.Del?”
appears on the display. Press [+] (YES) to delete the track, or
[–] (NO) to cancel the delete operation.
To record to Tracks 1 through 6
Lights
Lights
Flashes
Flashes
Flashes
Flashes
Disappears
Disappears
C