Cerwin-Vega CVM-1224FXUSB Music Mixer User Manual


 
13
REAR PANEL CONTROLS
(1). AC ADAPTOR IN CONNECTOR
Connects to the included power adaptor.
NOTE: Use only the adaptor included with this mixer. Use of a different adaptor may result in fire or electric shock.
(2). POWER SWITCH
Use this switch to turn mixer power to ON or OFF.
(3). MAIN L/R OUTPUT XLR JACK
These jacks deliver stereo output of the mixer signal. You use these jacks, for example, to connect to the power
amplifiers driving your main speakers. You also use these jacks when you wish to record the signal utilizing the level
control applied by the main fader in the main control section.
(4). USB PORT
A standard Type-A to Type-B cable is required to connect the mixer to a computer or laptop. The built-in stereo USB
audio interface allows you to record and playback from a desktop or laptop computer using virtually any digital
recording software. Payback adjustment is made using the TAPE IN/USB level knob. Connecting the audio mixer to your
computer is a simple procedure that takes just a few minutes. Since the Cerwin-Vega audio mixer is USB compliant, you
can use either a MAC or Windows-based PC. You will find detailed instructions on setting up the audio mixer in either
MAC or Windows-based computers in the following sections of this manual.
USB Compatibility*
Windows 7
Windows Vista
Windows XP
MAC OS X
*For compatibility on new operating
systems, please contact Customer Service.