Filter
Top Products
MDMODE - Modem Mode
This command enables or disables the modem mode for the unit. When the modem
mode is enabled, the modem initialization string is sent out the serial port and the
serial port now requires a password before a command is processed. After five
minutes of serial inactivity the passcode will be requested to continue serial activity.
Command form: DEVICE
MDMODE
[Value]
Argument details
Name Description
Device 0–7 or * to select all units
MDMODE Command form
Value 0 = Off, 1 = On, 2 = Toggle, Null = current modem mode state
Example:
#47 MDMODE 1
On PSR1212 unit 7 (
#47
), the modem mode
(
MDMODE
) is on (
1
).
MIN - Minimum Gain Setting
This command changes or reports back the minimum gain setting for an input,
output or assignable processing block.
Command form: DEVICE
MIN
<Channel> <Group> [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
MIN Command form
Channel See Groups and Channels, page 93
Group I, O, M, P, L
Value -65.00 to 20.00 dB
Null to return the current setting
Example:
#44 MIN 2 M -10
On PSR1212 unit 4 (
#44
), the minimum (
MIN
)
relative gain setting for mic (
M
) channel
2
is
-10
dB.
112
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands