Filter
Top Products
Front panel features
Equalizer (EQ)
Many audio signals coming into the console require some degree of corrective eq in order to be
part of a good sounding mix. XRM offers a 4-Band EQ on each channel.The input EQ consists of
the bands: High, High-Mid, Low-Mid and Low.The High and Low frequency bands are shelving
equalizers, each have a boost/cut control and their frequencies are fixed.The High-Mid and Low-
Mid bands have a bell-shaped response, each band features variable boost/cut and adjustable fre-
quency.
high frequency—HF
Boost / Cut 15dB boost and cut. Shelving @ 12 kHz
high mid—HM
Frequency Continuously variable between 400 Hz and 8 kHz.
Boost / Cut 15dB boost and cut. Bell curve with a BW of approx 1.5 octaves
Low mid—LM
Frequency Continuously variable between 100 Hz and 2 kHz.
Boost / Cut 15dB boost and cut. Bell curve with a BW of approx 1.5 octaves
Low frequency—LF
Boost / Cut 15dB boost and cut. Shelving @ 80 Hz.
EQ on
Equalizer is OFF. The equalizer circuitry is bypassed.
Equalizer is ON. This switch is used to activate the EQ section and can be used to make
A/B comparisons between "flat" and eq'd signals.
p.9
Mono Input channel
1