DigiTech RP255 Music Pedal User Manual


 
40
   
   
   
   
   
Aux Input
The Aux Input allows you to connect an MP3 or CD player to the RP255 and jam with your favor-
ite artists. The signal from your MP3 or CD player is output through the left, right, and headphone
outputs of the RP255. To use the Aux Input, connect the headphone output of your MP3 or CD
player to the Aux Input on the rear panel of the RP255 using an 1/8" stereo cable, and press
play on your MP3 or CD player. Use the playing device’s volume control and the RP255’s Master
Level knob to balance the levels.
Expression Pedal
The Expression Pedal on the RP255 can be linked to control the RP255’s Volume, Wah, Wham-
my™, YaYa™, or almost any of the RP255’s other parameters in real time with your foot. When
a parameter has been linked to the Expression Pedal, a minimum (heel) and maximum (toe) value
can also be specified. Apply extra pressure to the toe of the Expression Pedal to activate the
V-switch, and the Expression Pedal switches between the linked parameter and the Wah. The
procedure for linking a parameter to the Expression Pedal is as follows: