Filter
Top Products
41
1. Press either Edit button until the Expression row has been selected (indicated by the LED light-
ing on the Expression row). appears in the display.
2. Rotate Knob2 until the desired parameter appears in the Display. See page 45 for a complete
list of parameters that can be linked to the Expression Pedal.
3. Rotate Knob3 to select the minimum (heel) value the assigned parameter will reach with the
Expression Pedal in the toe up position.
4. Rotate Knob 4 to select the maximum (toe) value the assigned parameter will reach with the
Expression Pedal in the toe down position.
5. Store your Expression Pedal assignment to your preset. See page 17 for more information on
the storing procedure.
Factory Reset
This function resets the RP255 to its original factory settings. This procedure erases all custom
User presets, and recalibrates the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All
suchdatawillbelostforever!Besureyouwanttoerasethememoryandstartfresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP255.
2. When the display prompts you with , release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until appears in the display and
release (The Factory Reset procedure takes approximately 20 seconds). The Expression Pedal
calibration procedure now commences.