Filter
Top Products
Elation Professional® www.elationlighting.com - Trio-1248 - Page 37
1. Insert the USB drive that contains the firmware update file.
-the file should be stored in the path of TRIO1248/VGA/Main
2. In Single scene mode, access Menu > Next “D key” > then press B key “Update VGA”
3. Press D key to Enter > D key once again to Enter “Main” folder.
4. After update is complete, restart your Trio by switching power Off then back On.
4.7.7 Update DMX_BS
This function is used to update the DMX Base programs.
The DMXBase files should be stored in the path of: Trio1248/DMXBase
1. Insert the USB drive that contains the firmware update file.
2. In Single scene mode, access Menu > Next “D key” > then press C key “Update Dmx_Bs”.
3. Input password: 168168 (press keys FX1, FX6, FX8...) or user password if it was changed.
4. Press D key to Enter.
5. Once update is complete, LCD will return to the home screen.
Your console will read the files from the USB Device.
Choose Enter to complete the Update of the DMX Base.
In this function, a conversion software (Trio Flash Convert) is adopted to convert your flash files, then
you can easily record the converted flash files to your console accordingly.
TRIO-1248 MENU