Filter
Top Products
Design Spot 575E™
©Elation Professional® 25
Design Spot 575E™
4. Auto Program
This function allows the internal programs to run. The desired program is selected in the
“Select program” section of the control menu. You can set the number of steps under
“Edit program”. You can edit the individual scenes under “Edit scenes”. With this
function, you can run the individual scenes either automatically, i.e. with the adjusted
Step-Time.
5. Music control
With this function, you can run the internal program via sound.
Information:
1. Time information
Current time
This function displays the running time of the fixture from the last power on. The
display shows “XXXX”, where “XXXX” represents the number of hours the fixture
has been running. This counter is automatically reset after every power-on.
Machine on time
This function tracks the total running time of the fixture from the very first start-up.
Where “XXXX ”represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely.
Lamp on time
This function tracks the total number of lamp running hours. Where “XXXX”
represents the number of hours the lamp has been running. This counter should be
reset after every lamp change.
Lamp off time
This function displays the running time of the lamp from the last power on. The
display shows “XXXX”, where “XXXX” represents the number of hours the lamp has