Filter
Top Products
Design Spot 575E™
©Elation Professional® 33
Design Spot 575E™
10. OPERATION
Operating Modes: The Power Spot 700CMY™ can operate in three different modes.
This next section will detail the differences in the operating modes.
• Stand alone mode - The fixture will react to sound, chasing through the built-in programs.
• Master/Slave mode - You can daisy chain up to 16 fixtures together to get a
synchronized light show without the need of an external controller. The fixtures will react to
sound chasing to synchronized light show.
• DMX control mode - This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation® Show Designer 2.
10.1 Universal DMX Control: This function allows you to use a universal DMX-512
controller such as the Elation® DMX Operator II™ or Elation® Show Designer 2™ to
control head movement, the color wheel, the shutter (strobe), and all other DMX traits.
A DMX controller allows you to create unique programs tailored to your individual
needs. The Power Spot 700CMY™ uses 16 DMX channels. See page 27 for detailed
description of the DMX traits.To control your fixture in DMX mode, follow the set-up
procedures on pages 13-15 as well as the set-up specifications that are included with
your DMX controller. Use the controller’s faders to control the various DMX fixture
traits.This will allow you to create your own programs.
9.1.1 Follow the instruction on page 18 to set the DMX address.
9.2.2 For longer cable runs (more than a 100 feet) be sure to use a terminator on the last
fixture.
9.2.3 For help operating in DMX mode consult the manual included with your DMX
controller.
9.2 Stand-Alone Operation (Sound Active): This mode allows a single fixture to run to
the beat of the music. Only use this mode when running a single fixture, or when
running several fixtures as individuals.
9.2.1 Mount your fixture in a secure and stable manner.