Filter
Top Products
Connecting to the USB Port
The mini Type B USB port is located on the HDMI DA2 front panel (
b
in figure 7 on page
10). It can be used to connect the distribution amplifier to a host computer to update
firmware or for configuration using SIS commands.
1. Connect a USB A to mini B cable between the USB Config port on the front panel of
the HDMIDA2 and the USB port of the PC.
USB Cable
Type A
USB
Mini Type B
USB
USB 1
USB
Ports
Computer
HDMI DA2 Front Panel
HDMI DA2
CONFIG
INPUT
EDID
OUTPUTS
12
SIGNAL
HDCP
Figure 4. Connecting a PC to the HDMI DA2 Front Panel USB Port
2. If this is the first time an HDMI DA2 has been connected to the PC, the Found New
Hardware Wizard opens. The first screen offers to connect to Windows Update to
search the web for the appropriate driver needed for the USB port to communicate
with the distribution amplifier. This is not necessary if the USB driver is already on your
PC.
HDMIDA2 • Installation 7