Filter
Top Products
<5>
CDT-05 PROFESSIONAL HYBRID TURNTABLE
INTRODUCTION:
Congratulations on your purchase of a Gemini CDT-05 Professional
Hybrid Turntable. The CDT-05 is the latest advancement in DJ technolo-
gy, combining the control of a fully functional high torque turntable with
the versatility and convenience of Compact Discs. In addition, the CDT-05
has the ability to play both Vinyl records and Compact Discs simultaneous-
ly, for an endless array of performance possibilities. With the proper maine-
nance, the CDT-05 will provide years of reliable and solid performance.
FEATURES:
- Audio CD, CD-R, CD-RW, and MP3 compatible
- Removable, virtually unskippable straight tone arm system
- High-Torque Direct Driven platter (3.6 kg/cm) provides full control over
CD playback
- Independent audio outputs for turntable and CD sections
- 3-position CD/TT mode switch allows simultaneous playback of both CD
and vinyl
- 3 DSP effects: Filter, Echo, and Phase with variable parameters
- Reverse switch
- Motor ON/OFF switch
- 3 Hot-Startable cue points with easy to operate memo button
- Master cue w/ hot-start feature
- Key Lock (Master Tempo)
- Anti-Shock Protection using RAM buffer memory
- Slot Loading mechanism with LED illumination
- Single auto-cue/continuous play modes
- Seamless looping with reloop/stutter & loop editing
- Pitch bend via platter or buttons
- Three mode time selection
- Frame accurate search & cue
- Large 4-line backlit dot matrix display
- Sturdy aluminum platter with finger grooves
- Variable Pitch control with ranges of 4%, 8% , 16%, and 50%
- Soft touch buttons with bright LEDs
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qual-
ified Gemini Sound Products service technician. In the USA: If you experi-
ence problems with this unit, please call 1 (732) 738-9003 for Gemini
Customer Service. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove. When operating, ensure that the unit has adequate ven-
tilation.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CON-
TROLS OR SWITCHES.
CDT-05 QUICK START INSTRUCTIONS:
1. Set up the unit according to the Connections/Setup and Tonearm Setup
section. Make sure to first review all of the warnings and cautions before
proceeding.
2. To play a CD, first insert a disc into the CD transport located on the front
right hand side of the unit, and switch the O
PERATION MODE SWITCH
(44) to
‘CD.’ Make sure the MOTOR ON/OFF (21) button is lit, and press the
PLAY/PAUSE BUTTON (16) to begin playback. You will have full access to
manipulating the music via the SCRATCH CONTROL VINYL PLATE (3), in the
same fashion as a turntable. You will also be able to apply digital effects to
the CD portion of the unit, including cue points, DSP effects, pitch,
reverse, etc. For detailed instructions on how each feature applies to CD
playback, see the Functions section.
3. To play a Vinyl record, place the specialized Slipmat on top of the
S
CRATCH CONTROL VINYL PLATE (3), so that the mat is flush with the SCRATCH
A
NCHOR
(4). Place a record on top of the Slipmat, and switch the O
PERATION
MODE SWITCH (44) to ‘TT.’ Make sure the MOTOR ON/OFF (21) button is lit,
and press the PLAY/PAUSE BUTTON (16) to begin playback. This might seem
unconventional at first, but you will find the performance to be flawless.
While in TT Mode, any manipulation of the vinyl record (or the platter)
will not be applied to the CD. In order to preserve vinyl’s unique sound
qualities as much as possible, the audio from the Turntable portion is not
sent through the DSP effects section.
4. In order to play both CD and Vinyl simultaneously, you must switch the
O
PERATION MODE SWITCH (44) to ‘MIX.’ In Mix Mode, the SCRATCH CONTROL
VINYL PLATE (3) will not control the CD. The purpose of this is so that a DJ
may play a beat off of CD, while scratching over it with a Vinyl record. Use
the MOTOR
ON/OFF
(21) button to start and stop the platter for Vinyl play-
back, and use the P
LAY/PAUSE BUTTON (16) to start and stop playback of the
CD portion. Note that the independent audio outputs on the back of the
CDT-05 allow you to connect the CD and Vinyl portion of the unit to sep-
arate channels of your audio mixer. In Mix Mode, the P
ITCH CONTROL (9)
will control the pitch of the Turntable portion, and the P
ITCH BEND BUTTONS
(10) will control the pitch of the CD portion. Because the unit shares many
functions between CD, Turntable, and Mix, it is best to read over the
Functions section to get a grasp of how each function behaves in each
mode.
5. Read the rest of the manual! Everyone (even the author of this manu-
al) wants to start playing right away, and that is understandable - especial-
ly with such an exciting and innovative product as the CDT-05. However,
the function of it does differ from conventional products, and this manual
is written to address those differences and put them into the perspective
and context of a performing DJ. You might even discover functions you
never knew existed! We know that you want to dive right in and get start-
ed, but keep the manual at an arm’s length, just in case you get stuck or
need clarification.
CONNECTIONS / SETUP:
1. P
OWER
SWITCH: The P
OWER
SWITCH
(33) turns the unit ON or
O
FF. Make sure the switch is in the ‘OFF’ position prior to mak-
ing any connections.
2. AC I
NLET
: The AC I
NLET (31), located on the rear of the
unit, is the connector which accepts the P
OWER C
ORD
(sup-
plied) used to power the unit.
3. V
OLTAGE
SELECTOR SWITCH
: The VOLTAGE
SELECTOR
SWITCH (32) allows the unit to operate on either 115 or
230 volt configurations, for worldwide operation. Prior
to using the unit, make sure that this switch reflects the voltage supplied in
your locality.
4. CD A
UDIO RCA OUTPUTS
(37): This set of outputs carries the
audio signal from the CD player portion of the unit and should be
connected to an appropriate line-level input on your audio mixer.
5. P
HONO RCA O
UTPUTS
(38): This set of outputs carries the audio
signal from the turntable portion of the unit and should be con-
nected to an appropriate phono-level input on your audio mixer.
6. G
ROUND TERMINAL: As you may notice, the CDT-05 does not have a tradi-
tional ground terminal, as most turntables have. The reason for this is that
the CDT-05’s turntable section is grounded internally and does not require
the use of a ground wire. If you are experiencing any type of ground hum
from the turntable section, verify that your CDT-05 is powered using the
same outlet as your mixer and the rest of your audio equipment.
7. D
IGITAL OUTPUT (36): This output carries audio from the CD
player portion of the unit in IEC-958 (S/PDIF) format, and can be
connectd to any device with the appropriate S/PDIF input, such as
a digital mixer, computer, or outboard D/A converter. Using this
particular output requires specialized equipment and may not apply to
your setup.
8. R
ELAY START JACK (35): This jack makes it possible to connect
two CDT-05s together, so that when one unit finishes playing, the
opposite unit automatically starts playback. For normal use, leave
this jack disconnected.
9. L
OW PROFILE OR STANDARD FEET (45): The
feet may be changed depending on the height
you wish to achieve. With the LOW PROFILE
ON
OFF
DIGITAL
OUT
RELAY