Filter
Top Products
3. SETTING A SEAMLESS LOOP:
a. During the playback of a CD, find the point at which you want to set the
beginning of the S
EAMLESS LOOP (LOOP IN A). If you want to set a SEAMLESS
L
OOP
on the fly, proceed to step B. Otherwise, while in CD Mode only, you
may pause the playback by pressing the PLAY/PAUSE
BUTTON
(16), and adjust
the L
OOP IN A position by using the SCRATCH CONTROL VINYL PLATE (3), then
proceed to step B.
b. At the point of which you wish to set the L
OOP IN A position, press the
LOOP IN A (28) button. This may be done while in either Play Mode or
Pause Mode.
c. At the point of which you wish to set the L
OOP
OUT B position, press the
L
OOP O
UT B/EDIT
(29) button. This may be done while in either Play Mode
or Pause Mode.
d. Once both the L
OOP
IN A and L
OOP
OUT B position have been set, the
loop will begin to play indefinitely, without any interruption. To restart the
loop from the beginning, or to stutter the loop, press the RELOOP (30) but-
ton.
e. To edit the L
OOP OUT B point, press the LOOP OUT B/EDIT (29) button.
The loop will disengage, and you will be free to replace the LOOP O
UT B
position, simply by pressing the L
OOP OUT B/EDIT (29) button again when
you have reached the at which you wish to set the L
OOP OUT B position.
f. To edit the L
OOP IN A point, simply press the LOOP IN A (28) button dur-
ing loop playback at the time you wish to set the new L
OOP IN
A point. Note
that you will only be able to move the L
OOP IN A point to a time already
within the loop that was originally set.
g. To exit the S
EAMLESS LOOP
and resume normal playback, press the L
OOP
OUT B/EDIT (29) button. If necessary, you can set a brand new SEAMLESS
LOOP (return to step A), or restart the previously playing loop by pressing
the R
ELOOP (30) button.
SPECIFICATIONS
TURNTABLE SECTION:
Type................................................................Direct Drive Manual Turntable
Drive Method...........................Super High Torque (3.6 kgf/cm) Direct Drive
Motor..............................................................................................DC Motor
Speed................................................................................33 1/3, 45, 78 RPM
Variable Pitch.............+/- 4, 8, 16, 50% Slider with Range Selection Buttons
Wow and Flutter.......................................................Less than 0.25% WRMS*
*This rating refers to the turntable and platter assembly only and
excludes the effects of records, cartridges, or tonearms.
TONEARM SECTION:
Type......................................................Statically Balanced Straight Tonearm
Headshell Weight....................................................................................5.6 g
COMPACT DISC SECTION:
Quantization...........................................1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate.............................................................................8 Times
Sampling Frequency.........................................................................44.1 kHz
Frequency Response.............................................................20 Hz to 20 kHz
Total Harmonic Distortion....................................................Less Than 0.05%
Signal to Noise Ratio.............................................................................86 dB
Dynamic Range......................................................................................90 dB
Digital Output......................................................................IEC958 (S/PDIF)
Channel Separation..................................................................86 dB (1 KHz)
Output Level....................................................................2.0 +/- 0.2V R.M.S.
Power Supply.............................................................AC 115/230V, 60/50 Hz
Time Display...........................Track Elapsed, Song Remain, or Total Remain
Instant Start....................................................................Within 0.03 Seconds
Variable Pitch.............+/- 4, 8, 16, 50% Slider with Range Selection Buttons
WEIGHTS AND DIMENSIONS:
Dimensions: 17.75 x 14.65 x 6.3” (450 x 372 x 160.5 mm)
Unit Weight: 20.2 lbs (9.1 kg)
Specifications and design are subject to change without notice for purpose
of improvement.
*The stated warranty does not affect statutory local warranties
OPTIONAL ACCESSORIES:
DJX-05 Professional Monitoring Headphones
GX-450 Powered ABS Loudspeakers
CS-02 Professional 5-Channel Stereo Mixer
For more information on new and exciting Gemini products, visit our
website at http://www
.geminidj.com!
DJX-05
GX-450
CS-02
NOTES:
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
<8>