HP (Hewlett-Packard) EPM E4419A Music Mixer User Manual


 
HP4402.book : chapter3.fm 22 Wed Apr 23 15:29:05 1997
Menu Reference
Front Panel Menu Reference "System/Inputs" Menu
3-22 HP EPM-442A User’s Guide
Press this softkey to return to the “System/Inputs” menu.
Press this softkey to access a menu which allows you to modify the
setup of the recorder output. Refer to “Recorder Output”, on
page 2-43 for further information.
Press this softkey to switch the rear panel Recorder Output on
or off. The Recorder Output produces a dc voltage that
corresponds to the selected input channel power level in
Watts.
Press this softkey to enter the input power level that you want
to represent the 1 V
dc
maximum output voltage of the
Recorder Output.
Press this softkey to enter the input power level that you want
to represent the 0 V
dc
minimum output voltage of the
Recorder Output.
Press this softkey to select which channel input signal appears
on the Recorder Output.
Press this softkey to access a menu which allows you to test and
service your power meter.
Press this softkey to access the power meter’s self test menu.
Press this softkey to run a series of tests on the power meter.
Refer to “Instrument Self Test”, on page 2-52 for further
information on the tests run.
Press this softkey to verify that the power meter makes an
accurate measurement of it’s 1 mW POWER REF output.
Press this softkey to access a menu which allows you to
select individual self tests to be run.
Done
Recorder Output
Output Off On
Max Power
Min Power
Output A B
Service
Self Test
Instrument Self Test
Confidence Check
Individual