Filter
Top Products
iLive Fixed Format Getting Started Guide 3 AP7141 iss.2
Table of Contents
Introduction ............................................................................................................................................... 5
System components.............................................................................................................................. 6
T Series control layout ......................................................................................................................... 7
R Series control layout......................................................................................................................... 8
Step 1 – Connect and power up....................................................................................................... 9
ACE audio/control link between MixRack and Surface
Network settings
Booting the system up and powering down, the Status screen
Step 2 - Load a Template Show as a starting point..............................................................11
Choose your console application
Load a Template Show and choose your surface type
Identify the socket patching and connect the audio
Step 3 – A few things to know before starting ........................................................................12
Become familiar with the operating principles
Step 4 – Name and colour channels............................................................................................14
Using the virtual write-on strip
Step 5 – Work with the channel processing
.............................................................................15
One button access to the preamp, dynamics, EQ, delay
Preamp Gain Sharing using Trims
GEQ on faders
Step 6 - Work with the mix................................................................................................................16
One button access to the assignments, pre/post settings and levels
The Routing screen
Work with the FX
DCAs and mute groups
Channel Ganging
COPY / PASTE /RESET
Step 7 – Patching signals .................................................................................................................19
Input, output and insert patching
Step 8 – Customise your configuration......................................................................................22
Change the strip layout
Change the mix bus configuration
Step 9 - Save your settings ..............................................................................................................23
The memories – User Profiles, Libraries, Scenes, Shows
System Example....................................................................................................................................26
FOH/Monitor dual system using digital mic split
Default Template Show Layout ......................................................................................................27
Format, strip layout and socket patching of the FOH_LRSub Show