Filter
Top Products
14 SC5000 Rack Kit Installation Guide
Remove Door
1. Move the chassis so the door hangs over the edge of your workbench.
2. Open the door.
3. Press the plastic clip (Figure 5, A) in towards the chassis.
4. Pull the hinge pin (Figure 5, B) out with one hand while supporting the door with the other.
5. Slide the door to the left to remove it from the other hinge pin.
6. Remove the hinge pins and save for future use.
OM09389
B
A
Figure 5. Removing the Hinge Pins
A. Plastic clip
B. Hinge pin