Filter
Top Products
20 SC5000 Rack Kit Installation Guide
Install 5 ¼-Inch Devices into the Reorientation Bracket
1. Remove the two screws that hold the EMI shield in place.
2. Remove the EMI shield.
3. Slide the device into the bracket.
4. Insert and tighten the four screws removed when you removed the slide rails.
OM09392
C
A
B
D
Figure 11. Installing 5 ¼-Inch Devices
A. 5 ¼-Inch device
B. Screws that hold the device
C. EMI shields
D. Screws that hold the EMI shields