Filter
Top Products
15
English
Screw Ç
Mounting bracket
Camera mounting frame
Screw ı
Lever
Screw Ç
4.
3.
5.
Relay board
Slot
Mounting KY-F560 Camera on this Unit (continued)
3.
Place the camera on top of the camera
mounting frame and use the screw Ç pro-
vided to secure the camera to the base of
the frame.
Use the camera mounting bracket screw
hole to secure the camera.
4.
After the camera mounting frame is in-
serted into this unit, secure it by screwing
back the 2 screws ı which were taken
out earlier in above-mentioned step
2.
.
5.
Insert this unit’s relay board into the slot
at the rear of the camera and secure it by
screwing back the 2 screws Å which were
taken out earlier in above-mentioned
step
1.
.
Notes
● Please remove the camera lens mount
cap before hand.
● Before inserting the camera mounting
frame into this unit, turn the lens secure
lever located in front of
the camera clockwise to
move it to a lower posi-
tion. If the lever remains
at the upper position, it
may hit this unit when the
frame is being inserted.
Note
Ensure that the relay board is inserted
all the way in.