Filter
Top Products
Page
10
2
PLAYING THE PIANO
2. PLAYING THE PIANO
1) BASIC OPERATIONS
This section provides the basic procedures for turning the power on and playing the CN piano.
SETTING UP THE PIANO
The CN piano is equipped with stereo speakers and an amplifi er—no addition equipment is required to begin
playing the instrument, provided AC power is available.
Step1
Connect one end of the AC power cable to the piano's power jack
and the other end of the cable to a wall AC outlet.
Step2
Press the POWER SWITCH to turn on the power.
The POWER SWITCH is located at the right end of
the front panel.
Press the POWER SWITCH again to turn off the
power.
When the POWER button is pressed, the LED
indicator for the PIANO1 button will turn on and
the Concert Grand sound will automatically be
selected.
Step3
Adjust the volume level using the MASTER VOLUME slider.
The MASTER VOLUME slider controls the volume level of the speakers and connected headphones.
Move this slider to the right to increase the volume and move it to the left to decrease the volume.
Use this slider to set the volume to a comfortable listening level—the middle is often a good starting point.
ON
Backside of the unit
Power
cable entry
point
Speaker
Side panel