Filter
Top Products
Page
41
FUNCTION BUTTONS
5
3) MIDI CHANNEL
This function is used to determine on which MIDI channel the CN piano will exchange MIDI information with
external MIDI devices and instruments or a personal computer.
The selected channel will function as both the transmit and receive channel.
Step1
Hold down the TOUCH and TRANSPOSE buttons and press the ELECTRIC PIANO button.
The display will alternate between showing ‘Chn’ (Channel) and the channel number. The default channel is 1.
Step2
Use the VALUE buttons to change the channel number.
The channel number can be set from 1 to 16.
The CN piano’s MIDI channel setting defaults to receiving MIDI channel information from all channels, 1 to 16. each
time the power is turned on. This is called ‘omni mode on’. The CN piano will switch to ‘omni mode off’ when a specifi c
channel is selected using the MIDI channel function, and data will only be received on that specifi ed channel. In order
to specify channel 1 in the ‘omni mode off’ state, fi rst select channel 2, then select channel 1.
Hold down both buttons.
1
2
MIDI Channel