Filter
Top Products
– 13 –
keyboard and lower keyboard-and lets you play a different sound in each
section.
Press the SPLIT button to activate the split function. First choose the
sound you would like to use for the upper keyboard. Then, while
holding down the SPLIT button, choose the sound for the lower
keyboard.
You can adjust the volume balance between the two sounds. Use the Dual/
Split/Rhythm Balance slider to adjust the balance. Move the slider to
the right to increase the volume of the upper sound and decrease the
volume of the lower sound. The balance changes in the opposite way
when the slider is moved to the left.
The split point determines where the upper keyboard section will be divided
from the lower one. You can move the split point to any key you like. The
default split point is set between F2 and F#2. This point can be moved to
anywhere on the keyboard. Press the desired key while holding down
the SPLIT button. The key you pressed becomes the lowermost note for
the upper section.
ABOUT POLYPHONY
The CP piano is capable of playing up to 64 notes simultaneously (64-note
polyphony). When playing in dual mode or when playing the stereo piano
sound, the polyphony will be reduced by half since the piano has to produce
two sounds for each note.
(7) Reverb
-REVERB adds reverberation to the sound simulating the acoustic
environment of a recital room or concert hall.
There are six types of reverb in the CP95. They are Small Room, Medium
Room, Large Room, Medium Hall, Large Hall and Plate.
To add reverb to the sound, press the REVERB button. The LED
indicator will be turned on and the LED will show you which type of
reverb is currently selected.
To change the reverb type, use the VALUE buttons while holding down
the REVERB button.
The reverb is “ON” when the LED of the REVERB button is lit.
Pressing the REVERB button once again turns the reverb “OFF”.
When the power is turned on, the reverb function is automatically activated.
Small Room
Large Room
Medium Hall
Large Hall
Plate
Medium Room