Filter
Top Products
– 7 –
3. Place the piano on the front half of the stand
so that the metal fitting holes are seen when
viewed from the top. Slide the piano backward
while holding it with one hand so that it does
not incline and fall from the stand. The hooks
on the piano are then engaged with the metal
fittings on the Side Panels. Pay attention so
that your hand or fingers are not caught
between the stand and piano. Fasten the piano
and the stand with four bolts(F).
CAUTION: Be sure to secure the piano to
the stand with the screws. If you fail to do
so, the unit could fall from the stand causing
damage or personal injury.
4. Insert the pedal connection cord that comes
from Pedal Board (C) into the piano’s pedal
jack and fasten with cord clamps.
5. Turn the Adjuster (installed on the bottom
of C) until it touches the floor to support the
pedal board.
(F)
Hand or Finger
catching hazard
Bottom View
(H)