Korg KM-2 Musical Instrument User Manual


 
4
Effect program list
Effect program list
KM-2 EFFECT PROGRAM LIST
EFFECT GROUP PROG TITLE X Y BPM
FILTER 0 RESONANCE FILTER FREQUENCY RESONANCE
1 ISOLATOR LPF/HPF TYPE HI CUT <-> LOW CUT NO ASSIGN
2 WAH FILTER SPEED DEPTH
3 DIST+VOICE FILTER TALKING DISTORTION
4 DIST+FILTER FREQUENCY DISTORTION
5 MANUAL PHASER FREQUENCY RESONANCE
6 PAN BY HPF X-FADE PAN FREQUENCY
7 DIST+ISOLATOR LOW-MID-HI DISTORTION
8 MID FREQ ISOLATOR MID BOOST<->CUT NO ASSIGN
9 3BAND ISOLATOR HI CUT <-> LOW CUT MID LEVEL
MODULATION 0 VIBRATE SPEED DEPTH
1 PHASER SPEED FREQUENCY
2 AUTO PAN LFO SPEED DEPTH
3 FLANGER+FILTER FLANGER SPEED FILTER FREQ
4 DIST+PHASER FREQUENCY FX LEVEL
5 MANUAL FLANGER1 DELAY TIME RESONANCE
6 MANUAL FLANGER2 DELAY TIME RESONANCE
7 PITCH SHIFT Lch PITCH Rch Pitch
8 TREMOLO SPEED DUTY
9 STEP PHASER MOD STEP RESONANCE
BPM FX 0 BPM DELAY1 X1-3 X3-5 X5-7 X7-9 FEEDBACK
DELAY TIME
1/4BEAT 1/2 BEAT 1/3 BEAT 3/4 BEAT
1 BPM DELAY2(TAPE ECHO TYPE ) X1-3 X3-5 X5-7 X7-9 FEEDBACK
DELAY TIME
1/4BEAT 1/2 BEAT 1/3 BEAT 3/4 BEAT
2 BPM MULTI TAP DELAY1 NO ASSIGN LEVEL DELAY TIME
3 BPM MULTI TAP DELAY2 NO ASSIGN LEVEL DELAY TIME
4 BPM MULTI TAP DELAY3 NO ASSIGN FEEDBACK DELAY TIME
5 BPM PHASER X1-3 X3-5 X5-7 X7-9 RESONANCE
SPEED
x2BEAT x1 BEAT 1/2 BEAT 1/4 BEAT
6 BPM FLANGER X1-3 X3-5 X5-7 X7-9 RESONANCE
SPEED
x2BEAT x1 BEAT 1/2 BEAT 1/4 BEAT
7 BPM TREMOLO X1-3 X3-5 X5-7 X7-9 DEPTH
SPEED
x1BEAT 1/2 BEAT 1/4 BEAT 1/8 BEAT
8 BPM STEP PHASER FREQUENCY(MANUAL) RESONANCE SPEED
9 BPM STEP FLANGER STEP SPEED RESONANCE SPEED
DELEY 0 TAPE ECHO DELAY TIME FX LEVEL,FEEDBACK
1 DELAY DELAY TIME FX LEVEL,FEEDBACK
2 DELAY DELAY TIME FX LEVEL,FEEDBACK
3 DELAY (POST FADER TYPE) DELAY TIME DELAY LEV
4 MULTI TAP DELAY TONE FEEDBACK
5 LONG DELAY FEEDBACK FX LEVEL DELAY TIME
6 PING PONG DELAY DELAY TIME FEEDBACK
7 TALK MOD+DELAY TALKING DELAY LEVEL
8 FILTER +DELAY FILTER FREQ RESONANCE
9 DUB+DELAY DELAY TIME TONE
REVERB 0 HALL REVERB TONE REVERB LEVEL
1 GATE REVERB1 TONE REVERB LEVEL
2 PLATE REVERB REV TIME REVERB LEVEL
3 GATE REVERB2 FREQUENCY REVERB LEVEL
4 REVERB+DELAY DELAY FEEDBACK REVERB LEVEL
5 REVERB+DELAY DELAY TIME REVERB LEVEL
6 TALK MOD+REVERB TALKING RESONANCE
7 FILTER+REVERB FILTER FREQ REVERB LEVEL
8 3D PAN L<->R PAN REVERB LEVEL
9 ROOM REVERB TONE REVERB LEVEL
SFX 0 STEP MODULATION MOD DEPTH FX LEVEL
1 RING MOD+FILTER RING FREQ FILTER FREQ
2 SIN WAVEFORM OSCLATOR PITCH OSC LEVEL
3 BPM DELAY + ISOLATOR ISOLATOR LOW-MID-HI DRY/WET BALANCE DELAY TIME
4 RING +DELAY TIME RING+DELAY BALANCE
5 TREMOLO+DELAY TIME + LFO SPEED DLY TREM X-FADE
6 SPECIAL ECHO TIME FX LEVEL
7 VOICE OSCLATOR PITCH CHARACTER
8 SQUARE WAVEFORM OSCLATOR PITCH OSC LEVEL
9 AQUA SPEED FX LEVEL
X-FADE 0 REVERB X-FADE1 CH1 CH2 CH1 CH2 REV LEVEL
1 REVERB X-FADE2 CH1 CH2 CH1 CH2 Y:5-9 CH1 REV LEVEL
Y:1-5 CH2 REV LEVEL
2 ISOLATOR X-FADE CH1 CH2 CH1 CH2 Y:5-9 HI CUT (CH1), LOWCUT(CH2)
Y:1-5 LOW CUT (CH1), HI CUT(CH2)
3 FILTER X-FADE2 CH1 CH2 CH1 CH2 FILTER FREQ
4 RESONANCE FILTER X-FADE CH1 CH2 CH1 CH2 Y:5-9 LPF FREQ (CH1), LOWCUT(CH2)
Y:1-5 LOW CUT (CH1), LPF FREQ(CH2)
5 BPM DELAY X-FADE CH1 CH2 CH1 CH2 Y:5-9 CH1 DLY LEVEL
DELAY TIME
Y:1-5 CH2 DLY LEVEL
6 PHASER X-FADE CH1 CH2 CH1 CH2 PHASING LEVEL
7 TAPE ECHO X-FADE CH1 CH2 CH1 CH2 DRY/WET BALANCE
8 FLANGER+REV X-FADE CH1 CH2 CH1 CH2 FLANGER+REV LEVEL
9 STEP MOD X-FADE CH1 CH2 CH1 CH2 STEP MOD LEVEL
SAMPLE/PLAY 0 LOOP1(AUTO REC START) LOOP END TIME CONTROL PLAYBACK LEVEL
1 FORWARD & REVERSE FORWARD & REVERSE PLAYBACK LEVEL
2 FORWARD & REVERSE(Hi SPEED) FORWARD & REVERSE PLAYBACK LEVEL
3 SCRATCHING SCRATCH Y:5-9:GATE ON
Y1-5:GATE OFF
4 SCRATCHING WITH FILTER SCRATCH FILTER FREQ
5 TIME STRETCH SLOW <-> FAST TEMPO PLAYBACK LEVEL
6 SCRATCHING WITH BPM DELAY SCRATCH DELAY LEVEL DELAY TIME
7 LOOP2 LOOP START TIME CONTROL PLAYBACK LEVEL
8 FORWARD & REVERSE with DELAY FORWARD & REVERSE DELAY LEVEL
9 FORWARD&REVERSE with SFX FORWARD & REVERSE SFX CONTROL
About programs marked by
Regardless of the FX INSERT location, the sample will be recorded from MASTER, and when monitoring CH1, CH2 or CH1&2 from the PHONES jack, the sound will be monitored without delay reverb
applied.
About AUTO REC START
When SAMPLE/PLAY number 0 is selected, recording will use AUTO REC START. After the REC key is pressed, recording will begin automatically when a signal is input.
For the X-FADE effect group and for DELAY-3, the effect will not be applied to the sample playback sound when the FX INSERT switch is set to MASTER.
Crossfade by moving across the touch panel from the center left edge toward the center right edge in a “hill” shape.
Crossfade by moving across the touch panel from the center right edge toward the center left edge in a “hill” shape.
Crossfade by moving across the touch panel from the center right edge toward the center left edge in a “U” shape.