Korg PA50 Electronic Keyboard User Manual


 
73
Song Play operating mode
Tracks 1-8 page
Bar number
This counter shows the current bar number position of the
selected Song.
A (S1:SongName)
Pressed a first time (with a Song already selected) this button
pair selects Sequencer 1. Pressed a second time (or with no
Song selected), it opens the Song Selection page (see “Song
Select page” on page 73), allowing for selection of a single
Song or a Jukebox file for Sequencer 1.
If you select another Song, while a Song is in play within the
same Sequencer, the new Song will start playing.
While this parameter is selected, you can select a Song by
composing its progressive number (see “Selecting a Song
composing its progressive number” on page 70).
B (S2:SongName)
Pressed a first time (with a Song already selected) this button
pair selects Sequencer 2. Pressed a second time (or with no
Song selected), it opens the Song Selection page (see “Song
Select page” on page 73), allowing for selection of a single
Song for Sequencer 2.
If you select another Song, while a Song is in play within the
same Sequencer, the new Song will start playing.
While this parameter is selected, you can select a Song by
composing its progressive number (see “Selecting a Song
composing its progressive number” on page 70).
C (Lyrics)
Open the Lyrics page (see “The Lyrics page” on page 74). Lyr-
ics will be shown only if included into the selected Song, and
compatible with a standard format that Pa50SD can recog-
nize.
E (Upper 1 Program), F (Upper 2 Program), G (Upper 3 Pro-
gram), H (Lower)
Name of the Programs assigned to the Realtime (Keyboard)
tracks. Use these buttons to select, mute/unmute or change
the volume of the corresponding tracks.
TRACKS 1-8 PAGE
To see and edit tracks 1-8, press TRACK SELECT from the
main page. The TRACK SELECT LED turns on.
Press the TRACK SELECT button twice, to go back to the
main page.
A-H (Tracks 1-8 Programs)
Name of the Programs assigned to tracks 1-8. Use these but-
tons to select, mute/unmute or change the volume of the cor-
responding tracks.
TRACKS 9-16 PAGE
To see and edit tracks 9-16, press TRACK SELECT once from
the Tracks 1-8 page, or twice from the main page. The
TRACK SELECT LED begins flashing.
Press the TRACK SELECT button again, to go back to the
main page.
A-H (Tracks 9-16 Programs)
Name of the Programs assigned to tracks 9-16. Use these but-
tons to select, mute/unmute or change the volume of the cor-
responding tracks.
SONG SELECT PAGE
This page appears when you press either the A (S1:) or B (S2:)
button while you are in the main page. You can also access the
Song Select page by pressing PAGE +.
Press EXIT (or PAGE-) to go back to the main page of the
Song Play operating mode, without selecting a Song.
While in this page, select a Song for the selected Sequencer, or
a Jukebox file for Sequencer 1.
Note: There is a separate working directory for each onboard
sequencer.
A-C (File, folder)
Move the “.MID”, “.KAR” or “.JBX” file, or folder, to be
selected to the first line of the display. To select a file, press the
F2 (Select) button. To open a folder, press the F3 (Open) but-
ton.
The “ ” symbol identifies a folder.
E-F (Scroll Up)
Scroll the list up. Keep SHIFT pressed and press one of these
buttons to jump to the previous alphabetical section.
G-H (Scroll Down)
Scroll the list down. Keep SHIFT pressed and press one of
these buttons to jump to the next alphabetical section.
F1 (SD)
Press this button after replacing a card in the card drive. The
new card will be read, and the file list shown on the display
Piano1 Piano1
DkStrings Guitar01
Legato StrngEns2
BrassyHorn VoxPad1
S1:MySong
Strings1 VocaEns
DkStrings Bassi
Legato StrngEns2
BrassyHorn Strings2
S1:MySong
CLUB |
BALLADS
0001 MYSONG.MID |
SD SELECT OPEN CLOSE
Song Selection