Filter
Top Products
24
Editor operation
-
Program edit mode
1
In the editor, click the PROG EDIT button to enter Program Edit mode. The method of
selecting the timbre you want to edit is the same as when operating the PS60 itself.
If two or more timbres are turned on, the timbre selector button of each timbre that is
currently on will blink when you click the PROG EDIT button. Click the timbre selector
button of the timbre that you want to edit. If Split is on, you can use the CTRL buttons to
switch between MAIN and SUB, and select a sub timbre that's turned on.
2
Click the [Quick] tab of the edit pages area. The Quick page allows you to edit all
parameters other than effects (quick parameters) that can be edited on the PS60 itself. The
effects can be edited in the [IFX] and [MFX/EQ] tab pages.
3
In Program edit mode, you can use the EASY SETUP buttons to select only SEND 1
(MOD SEND) and SEND 2 (REV/DLY SEND). The EASY SETUP knobs will affect
only the selected timbre. SPLIT SETTING and CTRL will be unavailable.