Filter
Top Products
23
● Hold down the EXIT button and press the
EDIT
®®
®®
® button.
The LCD will indicate “PROG” for approximate-
ly one second.
The Value dial will select programs, and the +/–
buttons will adjust the master level. You can use
the Value dial to select programs quickly.
hold down
● Hold down the EXIT button and press the
BYPASS
·
TUNE button.
The LCD will indicate “LOCK” for approximately
one second.
The +/– buttons will select programs, and other
buttons and the Value dial will not function (i.e.,
“key lock”). In this state, selecting programs is
the only operation you can perform, which can
help prevent inadvertent program changes dur-
ing a live performance etc.
hold down
To change the setting, hold down the EXIT button
and press the button for the desired setting.