Filter
Top Products
PAGE 12 — MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07)
EM-900SDCE MIXER — GENERAL INFORMATION
GENERAL
Multiquip's EM-900SD CE series plaster and mortar mixer is
shipped completely assembled and has been factory tested.
The drum batch capacity of this mixer is between 6 and 7 bags
using DIN 1164 size bags (25 kg/bag). With proper care, it will
give continuous service year-after-year.
This mixer is powered by a
6.8 HP HATZ Model 1B30
diesel
engine. The power from the engine is transmitted via the clutch/
reduction assembly directly to the paddle shaft. Therefore
providing high mixer torque and eliminating V-belts .
BEFORE STARTING
Before starting the engine, read the engine
owners manual and thoroughly understand the
safety information.
OIL LEVELS
Be sure to check the oil levels in the engine and engine reduction
unit before starting the unit.
HARDWARE
Check all hardware on the mixer before starting. Periodically
inspect all hardware. Loose hardware can contribute to early
component failure and poor performance. Use Table 3 ( Torque
Chart) as a general guideline and keep all hardware tight.
DIESEL ENGINE CARE
For care and operation of the
HATZ
diesel engine, refer to the
engine manufacturer’s operating instructions furnished with the
engine. We recommend draining and refilling the engine
crankcase at least every thirty hours of operation. Check the
engine oil level daily.
trahCeuqroT.3elbaT
retemaiDerawdraHeuqroT
)81-"61-5(mm49.7m/fgk711
2
).sbl-tf42(
)42-"8/3()mm35.9(m/fgk081
2
).sbl-tf73(
)31-"2/1(mm07.21m/fgk091
2
).sbl-tf93(
)31-"2/1(mm07.21
8edarG
m/fgk934
2
).sbl-tf09(