Filter
Top Products
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 17
LUBRICANTS
CLUTCH OIL
1. Remove the clutch oil level plug (Figure 8). If oil begins to
seep out as the plug is being removed, then it can be
assumed that the clutch oil is at the proper operating level.
2. If oil does not seep out as the oil level plug is being removed,
then remove the clutch oil fill plug and fill with SAE 30
engine oil to the proper operating level.
GEAR REDUCTION OIL (TRANSMISSION)
1. Remove the transmission oil level plug (Figure 8). If oil
begins to seep out as the plug is being removed, then it
can be assumed that the transmission oil is at the proper
operating level.
2. If oil does not seep out as the oil level plug is being removed,
then remove the transmission oil fill plug and fill with
SAE 90 transmission oil to the proper operating level.
Figure 8. Transmission/Clutch Lubrication
EM-900SDCE MIXER — INSPECTION