Filter
Top Products
18
RECORDING FROM THE
RADIO
1. Set
FUNCTION SELECTOR
to
TUNER
.
2. Load a blank tape (or one that you
want to record over) into TAPE 1,
with the side you want to record
on facing you, and the full reel to
the left.
3. Press
PAUSE
then
RECORD
on
TAPE 1.
PLAY
and
RECORD
both
lock down.
4. When the selection you want
plays on the radio, press
PAUSE
again to start recording.
Note:
Sometimes AM broadcasts
produce a hum or whistling sound
that you hear while playing a
recorded tape. To reduce or elimi-
nate this sound, set
BEAT CUT
on
the back of the system to the posi-
tion that gives you the best quality
recording.
DUBBING A CASSETTE
TAPE
Follow these steps to dub (copy) from
one cassette tape to another.
1. Set
FUNCTION SELECTOR
to
TAPE
.
2. Load the cassette you want to
copy into TAPE 2 with the side
you want to record from facing
you.
3. Load a blank cassette (or one you
want to record over) into TAPE 1
with the side you want to record
on facing you.
4. Press
PAUSE
, then
RECORD
on
TAPE 1.
RECORD
and
PLAY
both
lock down.
5. Press
PLAY
on TAPE 2 to begin
recording.
PAUSE
on TAPE 1
automatically releases.
Note:
You can listen to the tape
playing in TAPE 2 as you copy it.
Set
MASTER VOLUME
to a com-
fortable level. The volume setting
does not affect the recording level.
6. Press
STOP/EJECT
on TAPE 1 to
stop recording.
RECORD
and
PLAY
release.
7. Press
STOP/EJECT
on TAPE 2 to
stop playing the tape.
32-1159.fm Page 18 Monday, August 9, 1999 2:38 PM