Filter
Top Products
21
4. Use a cotton swab dipped in
denatured alcohol or tape head
cleaning solution to clean the
record/play heads, pinch rollers,
capstans, tape guides, and erase
heads.
5. When you finish cleaning, press
STOP/EJECT
on TAPE 1 and
TAPE 2 and close the cassette
compartment doors. Then recon-
nect power.
Your local RadioShack store sells a
full line of cassette deck cleaning sup-
plies.
Restoring Tape Tension and
Sound Quality
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
To restore the sound quality, fast-
forward the tape from the beginning to
the end of one side, then completely
rewind it. Then loosen the tape reels
by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution:
Be careful not to damage
the cassette when tapping it. Do not
touch the exposed tape or allow any
sharp objects near the cassette.
THE FCC WANTS YOU
TO KNOW
This music system complies with the
limits for a Class B digital device as
specified in Part 15 of
FCC Rules
.
These limits provide reasonable pro-
tection against radio and TV interfer-
ence in a residential area. However,
your system might cause TV or radio
interference even when it is operating
properly. To eliminate interference,
you can try one or more of the follow-
ing corrective measures:
• Reorient or relocate the receiving
antenna
• Increase the distance between the
system and the radio or TV
• Use outlets on different electrical
circuits for the system and the
radio or TV
Consult your local RadioShack store if
the problem still exists.
You must use shielded interface ca-
bles with this system.
TAPE 1
TAPE 2
32-1159.fm Page 21 Monday, August 9, 1999 2:38 PM